OmniSwitch os6900, Network Configuration Manual, Page: 740 / 942

Configuring Profiles Configuring Universal Network Profiles
page 27-40 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Configuring an Authentication Server Down UNP
An authentication server down UNP is used to classify devices attempting to authenticate through UNP
bridge ports (access ports not supported) when the RADIUS server is unreachable. By default, no such
UNP exists in the switch configuration. To create this type of UNP, use the
unp auth-server-down-unp
command.
-> unp auth-server-down-unp down_unp
After a device is classified into the VLAN for this UNP, an attempt to re-authenticate the device is made
after a specific period of time (60 seconds by default). To change this time value, use the
unp auth-
server-down-timeout command.
-> unp auth-server-down-timeout 120
The authentication down UNP and related timer value are applied to all traffic received on all UNP ports
in the event the RADIUS server becomes unreachable. To verify if this setting is enabled or disabled, use
the
show unp global configuration command