OmniSwitch os6900, Network Configuration Manual, Page: 169 / 942

Configuring Dynamic Link Aggregation Dynamic Link Aggregation Default Values
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 8-3
Dynamic Link Aggregation Default Values
The table below lists default values for dynamic aggregate groups.
Parameter Description Command Default Value/Comments
Group Administrative State linkagg lacp agg admin-state enabled
Group Name linkagg lacp agg name No name configured
Group Actor Administrative Key linkagg lacp agg actor admin-key 0
Group Actor System Priority linkagg lacp agg actor system-
priority 0
Group Actor System ID linkagg lacp agg actor system-id 00:00:00:00:00:00
Group Partner System ID linkagg lacp agg partner system-id 00:00:00:00:00:00
Group Partner System Priority linkagg lacp agg partner system-
priority 0
Group Partner Administrative Key linkagg lacp agg partner admin-key 0
Actor Port Administrative State linkagg lacp agg admin-state active timeout aggregate
Actor Port System ID linkagg lacp agg actor system-id 00:00:00:00:00:00
Partner Port System Administrative
State linkagg lacp agg partner admin-
state active timeout aggregate
Partner Port Admin System ID linkagg lacp port partner admin
system-priority 00:00:00:00:00:00
Partner Port Administrative Key linkagg lacp agg partner admin-key 0
Partner Port Admin System Priority linkagg lacp agg partner system-
priority 0
Actor Port Priority linkagg lacp port actor port priority 0
Partner Port Administrative Port linkagg lacp port partner admin-
port 0
Partner Port Priority linkagg lacp port partner admin
port-priority 0