RADIUS Servers
Managing Authentication Servers
page 29-10
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
RADIUS Accounting Server Attributes
The following table lists the standard attributes supported for RADIUS accounting servers. The attributes
in the
radius.ini
file can be modified if necessary.
Num. Standard Attribute
Description
1 User-Name
Used in access-request and account-request packets.
4 NAS-IP-Address
Sent with every access-request. Specifies which switches a
user can have access to. More than one of these attributes is
allowed per user.
5 NAS-Port
Virtual port number sent with access-request and account-
request packets. Slot/port information is supplied in attribute
26 (vendor-specific).
25 Class
Used to pass information from the server to the client and
passed unchanged to the accounting server as part of the
accounting-request packet.
40 Acct-Status-Type
Four values must be included in the dictionary file: 1 (acct-
start), 2 (acct-stop), 6 (failure), and 7 (acct-on). Start and stop
correspond to login/logout. The accounting-on message is sent
when the RADIUS client is started. This attribute also includes
an accounting-off value, which is not supported.
42 Acct-Input-Octets
(Authenticated VLANs only) Tracked per port.
43 Acct-Output-Octets
(Authenticated VLANs only) Tracked per port.
44 Acct-Session
Unique accounting ID. (For authenticated VLAN users,
Alcatel-Lucent uses the MAC address of the client.)
45 Acct-Authentic
Indicates how the client is authenticated; standard values (1–3)
are not used. Vendor specific values must be used instead:
AUTH-AVCLIENT (4)
AUTH-TELNET (5)
AUTH-HTTP (6)
AUTH-NONE (0)
46 Acct-Session
The start and stop time for a user session can be determined
from the accounting log.
47 Acct-Input-Packets
(Authenticated VLANs only) Tracked per port.
48 Acct-Output-Packets
(Authenticated VLANs only) Tracked per port.
49 Acct-Terminal-Cause
Indicates how the session was terminated:
NAS-ERROR
USER-ERROR
LOST CARRIER
USER-REQUEST
STATUS-FAIL