RADIUS Servers
Managing Authentication Servers
page 29-8
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
7
8
9
10
11
12
13
14
15
16
Framed-Protocol
Framed-IP-Address
Framed-IP-Netmask
Framed-Routing
Filter-Id
Framed-MTU
Framed-Compression
Login-IP-Host
Login-Service
Login-TCP-Port
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
17 Unassigned
—
18 Reply-Message
Multiple reply messages are supported, but the length of all
the reply messages returned in one access-accept or access-
reject packet cannot exceed 256 characters.
19
20
21
22
23
Callback-Number
Callback-Id
Unassigned
Frame-Route
Framed-IPX-Network
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
24 State
Sent in challenge/response packets.
25 Class
Used to pass information from the server to the client and
passed unchanged to the accounting server as part of the
accounting-request packet.
26 Vendor-Specific
See
“Vendor-Specific Attributes for RADIUS” on page 29-9
27 Session-Timeout
Not supported.
28 Idle-Timeout
Not supported.
29
30
31
32
33
34
35
36
37
38
39
60
61
62
63
Termination-Action
Called-Station-Id
Calling-Station-Id
NAS-Identifier
Proxy-State
Login-LAT-Service
Login-LAT-Node
Login-LAT-Group
Framed-AppleTalk-Link
Framed-AppleTalk-Network
Framed-AppleTalk-Zone
CHAP-Challenge
NAS-Port-Type
Port-Limit
Login-LAT-Port
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
Num. Standard Attribute
Notes