Omni Group Viverra, Manual

Page: 6 / 40

1.4 CERTIFICATION
The machine was manufactured in conformity with the EC Directives in force when the machine
was placed on the market, as stated clearly in the declaration of conformity, therefore it complies
with the safety requirement of the Machinery Directive.
1.5 WARRANTY
The machine is covered by a warranty on materials for the period indicated in the contractual
documents. The buyer loses the right to the warranty if and when modifications or repairs are
made to the provision without the manufacturer's consent. Labour and service call charges are not
covered by the warranty. In no case can compensation for damages be demanded. For further
clarifications on guarantee assistance conditions refer to the sales contract.
1.6 TECHNICAL ASSISTANCE
Ordinary and extraordinary maintenance must be carried out in compliance with the instructions
contained in this manual. Should any case occur which is not included here, and for any kind of
assistance, please contact directly the Builder, referring to the data written on the plate located on
the machine:
-
machine model;
- serial number;
- building year.
Prompt and precise answers can be only guaranteed if the data are referred correctly.
The Builder disclaims any liability for any damage to persons, property or environmental goods,
arising from improper use of the machinery, from mistakes in the installation or usage, and due to
incompetence, carelessness or neglect with regards to the advice and instructions contained in the
manual.
The Builder disclaims any liability for any damage to persons or property, or for any malfunction of
the machine, in case of use of non-original spare parts or non-suggested cleaning and
maintenance products
.
1.7 TASKS TO BE CARRIED OUT BY THE CUSTOMER
The Customer shall carry out the activities indicated in the documents enclosed in the sale contract
and within the time agreed with the Builder. If there are not any different agreements the following
tasks have to be carried out by the Customer:
-
providing the premises and taking care of any brickwork or duct system that might be
requested;
- taking care of the sources of energy and of the connection to them, in conformity with the Laws
in force in the country in which the machine is used.
1.8 SYMBOLS AND TERMS
The most important parts of the text are in bold and are signalled by the following symbols that are
placed before them.
IGM EN_REV4 6