Omni Group Viverra, Manual

Page: 9 / 40

malfunction or other related problems. Request any modifications to the Builder’s
Commercial or Technical Office.

When in use, some parts of the machine are subject to dangerous voltage. Disconnect
power supply and block reinsertion devices before servicing the machine or any
equipment connected to it.

Every intervention on the system or the equipment must be exclusively carried out by
qualified electrical maintenance workers.

Prevent water from dripping onto the electrical panel.

Staff persons operating in any way on the machine must have precise technical skills
and competences and must have acquired experience in the field. The lack of any of
these requirements may compromise the safety and efficiency of the machine.

The operation space that surrounds the machine should be clear of obstacles, cleaned
up and very illuminated.

The lighting level should always be such as to guarantee the safest possible working
conditions. Should any maintenance operation be necessary in areas or parts of the
machine with poor lighting, the maintenance staff must be equipped with a portable
lighting system.

Use accident-prevention equipment. Make sure that sleeves are tightened up around the
wrists or tucked up. Wear undamaged working clothing and use common sense when
operating the machine.

Wear suitable clothing and individual protection devices according to the used
products.

Do not use any neckties, bracelets, rings or other things that swinging could be
dangerously entangled in parts that are fixed or in motion.

Use the machine in normal psycho-physical conditions.
IGM EN_REV4 9