Omni Group Viverra, Manual

Page: 20 / 40

3.3 PROTECTIONS AND FIXED REPAIRS
During designing, a solution has been adopted to prevent / limit the access to dangerous zones of
the machine: a series of screw-fixed guards, completely preventing the access to the machine’s
internal parts.
Due to the fixing systems of the guards, tools are needed to open or remove them.
Only remove fixed guards during maintenance operations and while the machine is
disconnected from the power supply.
Never remove the pictograms from the guards, and immediately replace them if they are
faded or not easily readable.
Never remove fixed guards while the machine is operating.
Never start the machine if any fixed guard is missing. Before starting the machine, make
sure that fixed repairs are properly installed.
Never modify or replace fixed repairs with repairs in other materials, or with a different form
or function.
The internal electrical components and batteries are protected by a plastic cover
IGM EN_REV4 20