Omni Group Viverra, Manual

Page: 25 / 40

CHAPTER 4
TRANSPORT AND INSTALLATION
4.1 HANDLING AND TRANSPORT
Except different recommendations the machine can be handled with fork-lift trucks as shown in the
pictures below.
Insert the forks of the mechanical forklift truck inside the special guides (1) located on the
machine, by adjusting, with due care and attention, the depth of insertion to the length of the
guides.
- During handling the machine must be kept as close as possible to the ground.
- Before using the means of transport check their efficiency and their safety systems.
- Check that the carrying capacity of the means of transport is adequate to the machine mass.
- Check that the size of the passage-ways is compatible with the size of the machine.
- Carry the packed machine as near as possible to the installation place.
If made necessary by usage and premises equipment, highlight the layout of forklift traffic routes
with pictograms on the plant surface, to ensure workers’ safety.
1
1
IGM EN_REV4 25