Omni Group Viverra, Manual

Page: 22 / 40

3.4 SAFE USE OF THE MACHINE
The machine has been designed and built to wrap exclusively palletized loads with extensible film.
Control that pallets are balanced and centred.
3.5 CORRECT USE
This stretchwrapping machine is an automatic machine, designed to wrap palletized loads within
the limits set in the descriptions, tables, technical data and documents attached to this manual.
Should there be special working needs, please contact the Technical or Commercial Office of the
Builder.
Please remember that any changes must be authorized by the Builder in writing.

Please refer to paragraph 4.6 for further information about the electrical connections
3.6 INAPPROPRIATE AND INCORRECT USE
Any use different from that stated in this manual, not included in, or not deducible from it, must be
considered INAPPROPRIATE and FORBIDDEN, because potentially dangerous for the safety of
the operators, and it causes the contractual warranty to be invalidated.
It is therefore forbidden to:
- wrap loads with size or features different from those adequate to the table dimensions;
- use the machine for purposes that differ from the instructions on the correct use;
- use improper or incompatible materials, or auxiliary equipment;
- autonomously change or replace parts of the machine;
- change the speed of the machine components;
- change the machine cycle;
- install non-original parts;
- allow staff not adequately trained to use the machine;
- fail to follow safety instructions;
- fail to follow instructions for installation, use, maintenance and repair;
- fail to follow the safety rules of the workplace or the relative laws and regulations in force.
IGM EN_REV4 22