Omni Group Viverra, Manual

Page: 33 / 40

5.2.1 GREASING
COLUMN RACK GREASING
Every three months, or in case of prolonged inactivity, use a brush to spread some common cog
grease on the carriage rack and pinion located inside the column (remove casing to access the
moving mechanism).
5.3 ELECTRICAL PARTS MAINTENANCE
Before intervening on the machine’s electrical parts:
-
get the machine’s technical documentation;
- check that the technical documentation corresponds to the machine (the documentation must
be up-to-date, as difficulties might arise in working on a machine which has undergone
unregistered modifications).
Any modification must be registered and added to the
documentation ;
- check all the switches that disconnect the machine;
- to operate on power devices in danger conditions there must be more than one worker.
IGM EN_REV4 33