Omega DR130 SERIES, User Manual

Page: 52 / 99

5-11
Commands
5
MSG_DISP Display message
DIGITAL_PR Digital print
GR_TREND Trend recording in groups
MEMRY Store measured/computed
data on a RAM disk or write
them to DR.
FLOPY Store setup data on a floppy
disk or write them to DR.
MATH Computation start/stop/reset/
clear
p5 Auxiliary action information
• For p4=RECORD, selection of record start
or stop (ON, OFF)
• For p4=MSG_PR or MSG_DISP, message
number (01 to 20)
• For p4=GR_TREND, group number (G01 to
G07)
• For p4=MEMRY
DATA_WR When the data retention period
is LOGIC, measured/computed
data are stored at every
measurement for each event
action.
WR_TRG Measured/computed data are
stored.
RD_TRG Measured/computed data are
read.
LD_TRG1 Setting data are read.
LD_TRG2Setting data are read.
LD_TRG3
Setting data are read.
• For p4=FLOPY
LD_TRG1 Setting data are read.
LD_TRG2Setting data are read.
LD_TRG3
Setting data are read.
• For p4=MATH
START Computation starts.
STOP Computation stops.
RESET Computed data are reset.
CLEAR Computed data are cleared.
Event function setting by a remote, relay, timer,
manual function key or match time event
Setting SLp1, p2, p3, p4, p5, p6<terminator>
p1 Event action box number (01 to 30)
p2Event (REMOTE, RELAY, TIMER,
MFUNC_KEY, MATCH_TIME)
p3 Auxiliary action information
• For p2=REMOTE, contact number (1 to 12)
• For p2=RELAY, relay number
• For p2=TIMER, timer number (1 to 6)
• For p2=MFUNC_KEY, MFUNC_KEY
number (1 or 2)
• For p2=MATCH_TIME, match time number
(1 to 3)
p4 Action mode (EDGE, LEVL)
p5 Action
ALARM_ACK
Acknowledgement of
alarm status.
ALARM_RST Alarm reset
TIMER_RST Timer reset
RECORD Record start/stop
SPEED_CHG Change to second chart
speed
MSG_PR Message print
MANUAL_PR Manual print
MSG_DISP
Display message
DIGITAL_PR Digital print
GR_TREND Trend recording in groups
MEMRY Store measured/computed
data on a RAM disk or write
them to DR.
FLOPY Store setup data on a floppy
disk or write them to DR.
MATH Computation start/stop/reset/
clear
p6 Auxiliary action information
• For p5=RECORD, record start/stop selection
(ON, OFF)
• For p5=MSG_PR, MSG_DISP, message
number (01 to 20)
• For p5=GR_TREND, group number (G01 to
G07)
• For p5=MEMRY
DATA_WR When the data retention period
is LOGIC, measured/computed
data are stored at every
measurement for each event
action.
WR_TRG Measured/computed data are
stored.
RD_TRG Measured/computed data are
read.
LD_TRG1 Setting data are read.
LD_TRG2Setting data are read.
LD_TRG3
Setting data are read.
• For p5=FLOPY
LD_TRG1 Setting data are read.
LD_TRG2Setting data are read.
LD_TRG3
Setting data are read.
• For p5=MATH
START Computation starts.
STOP Computation stops.
RESET Computed data are reset.
CLEAR Computed data are cleared.
Example Set an event action to record message number 04 when
the chart ends in event action box 02.
SL02, CHART_END, EDGE, MSG_PR, 04
Comments • With an action as the start (event), another action
(action) can be executed automatically.
• Thirty types of event actions can be set.
• If the action mode is EDGE, the set action continues
even if the event action is over.
• If the action mode is set to LEVL and the action is
set to RECORD, SPEED_CHG, GR_TREND, or
MATH, the set action continues from the first event
occurrence to the next event occurrence.
• If the event is set to TIMER, MFUNC_KEY or
MATCH_TIME, the action mode to LEVL, and the
action to RECORD, the set action continues from
the first event occurrence to the next event
occurrence.
• For details on an event/action, see the separate
manual (IMDR231-01E).
SO Sets the computational expression.
Mode Operation mode
Setting SOp1, p2, p3, p4, p5, p6<terminator>
p1 Channel for computation:
A01 to A30
p2Computation on/off (on/off)
p3
Computational expression
(up to 40 characters)
5.5 Other Settings