Omega DR130 SERIES, User Manual

Page: 54 / 99

5-13
Commands
5
KEY_LOCK_OFF
Key lock is turned off.
S/U_LIST_START
Setup list printing starts.
S/U_LIST_STOP
Setup list printing is stopped.
MSG_PRINT
Message printing begins.
ALM_BUF_CLEAR
Alarm buffer is cleared.
MSG_BUF_CLEAR
Message buffer is cleared.
RAM_INIT
Internal memory is initialized.
COMM_INF
Information on communication module
parameter
MODULE_INF
Module information
ALL_ITEM
All items of parameter p1
p2Type of screen
OFF No display on the function screen
FUNC1Screen that appears when the FUNC
key is pressed.
FUNC3Screen that appears when the FUNC
key is pressed for 3 seconds.
INIT Initialize (Effective only when p1 is
set to ALL_ITEM.)
Example Display setup list printing start on the FUNC1 screen.
XFS/U_LIST_START, FUNC1
Comments • More than one function can be displayed on each
function screen.
• A function can be easily executed by being displayed
on the function screen.
XS Sets which settings are to be displayed
on the setting screen.
Mode Setup mode
Setting XSp1, p2<terminator>
p1 Contents to be displayed on the set screen
SYSTEM: System settings
UNIT
Unit settings
MATH Settings for computation of
respective
computation
channels
CONST Settings for computation
constants
MEMORY Settings relating to data
saving/reading in the built-in
RAM disk
FLOPPY Settings relating to data
saving/reading on floppy
disks
ZONE Zone recording settings
PARTIAL partially expanded record
settings
CHART2Second chart speed settings
TAG
Tag settings
TIMER Timer settings
LOGIC Logic settings
MESSAGE Message settings
GROUP Group settings
TREND Turning on or off analog
records for each channel
DIGITAL_PR Turning on or off digital
records for each channel
LIST_PR Turning on or off list printing
for each channel
MANUAL_PR Turning on or off manual
printing for each channel
SCALE_PR Turning on or off scale
printing for each channel
ALARM_PR Turning on or off alarm
printing for each channel
HEADER Header settings
TITLE Title settings
MOVE_AVE Moving average settings
INTERPOL Step interpolation settings
MATCH_TIME Match time settings
LIST_FMT
List printing format settings
COPY Copy contents settings
DST Summer/winter time
ALL_ITEM All items of parameter p1
p2Type of screen
OFF Nothing appears on the set screen.
SET Screen when the set key is pressed
SET3 Screen when the set key is pressed for
3 seconds
INIT Initialize. (Effective only when p1 is set
to ALL_ITEM.)
Example Show the settings of a tag on the screen for which you
have pressed the SET key.
XSTAG, SET
Comments • More than one setting item can be displayed on the
set screen.
• By displaying a setting item on the set screen, the
setting item can be easily set.
• MATH in parameter p1 is valid only for recorders
with the optional computing function or floppy disk
drive function.
• CONST is valid only for recorders with the optional
computing function.
• MEMORY and FLOPPY are valid only for recorders
with the floppy disk drive function.
XB Sets the burnout.
Mode Setup mode
Setting XBp1, p2<terminator>
p1 Channel number (001 to 030)
p2Selection of burnout
OFF
UP
Upscale traveling beyond the scale
DOWN Downscale traveling beyond the scale
Example Set channels 01 to 10 of subunit 0 to upscale burnout.
XB001-10, UP
Comments • If channels are to be set successively, the setting is
effective only when the channels are in the same
unit.
XJ Selection of reference junction
compensation
Mode Setup mode
Setting XJp1, p2, p3<terminator>
p1 Channel number (001 to 030)
p2Selection of reference junction compensation
value
INT Internal compensation circuit
EXT External junction compensation
p3 External reference junction compensation
value (-20000 to 20000)
Example Set channel 01 of subunit 0 to external junction
compensation at a compensation value of 1000
µ
V
XJ001, EXT, 1000
5.5 Other Settings