Omega DR130 SERIES, User Manual

Page: 70 / 99

6-8
6.7 System Configuration Output Format
The measurement interval and system connection data are output in the following format by the TS5
+ “Device Trigger (GET)” + CF command:
M : sssssCrLf
S1 : 0=MMMMMM(DD)1=MMMMMM(DD)~5=MMMMMM(DD)CrLf
Slot number
Each symbol denotes the following:
M:
Measurement interval mark
sssss: Measurement interval; output down to one decimal place (Example: 10.0
for a measurement interval of 10 sec.). The unit is “second.”
S1: Subunit number
0 ------------------ DR130/DR230/DR240
E ----------------- End mark
MMMMMM: Module name (6 characters)
COMM ---------- Communication module
RELAY --------- Relay output module
REMOTE ------- Remote module
INPUT ---------- Universal input module
ERROR --------- Module error
(DD): Internal code (hexadecimal, ASCII, 2 characters)