E
166
Make sure that the power of the personal computer and
the camera are OFF and the utility software is installed on
the computer before connecting. (Refer to the software’s
online manual for the installation.)
1
Connect the communication cable to the computer’s serial
port.
2
Open the connector cover.
3
Insert the plug and push it in as far as it will go.
4
Turn on the power of the personal computer to activate
the software.
◆
AC adapter is recommended for computer
downloads.
Note:
Summary of Contents for Digital Vision D-620L
