DP23-AOU/DP28-AOU
103
10
10
Troubleshooting
Phenomena
Cause
Remedy
Page
The power of DP2-AOU does
not turn ON.
DP2-AOU, AC adapter and power
cord are not connected properly.
Connect DP2-AOU, AC adapter and
power cord properly.
19
The image cannot be
acquired by pressing the
[Snapshot] button.
The movie cannot be
recorded by pressing the
[Movie] button.
Images or movies are being written
in the memory.
Wait one or more seconds, and press
the [Snapshot] button or the [Movie]
button again.
26,39
The capacity of the recording
media such as a USB flash drive,
etc. is full.
Replace the recording media or
delete unnecessary images. Or delete
images from the recording media after
transferring them to PC, etc.
64,44
Recording media such as a USB
flash drive, etc. are not connected
properly.
Connect the recording media such as
a USB flash drive, etc. to the connector
properly.
21
The LAN cable is not connected
properly. (Only when PC on the
network is specified as the save
destination of acquired images.)
Connect the LAN cable to the connector
properly.
22
Due to the network problem,
PC that is specified as the save
destination cannot be accessed.
(Only when PC on the network is
specified as the save destination of
acquired images.)
Consult with the network administrator
of PC that is specified as the save
destination.
8,88
The save folder is protected by the
password. (Only when PC on the
network is specified as the save
destination of acquired images.)
Connect the keyboard to DP2-AOU and
input the password. Or consult with
the network administrator of PC that is
specified as the save destination.
21
Due to the problems of connected
USB devices or the network, the
adverse effect is caused to the
camera operation.
Disconnect the USB device and the
LAN cable.
21
The play images are not
shown on the display.
The main switch is set to OFF.
Set the main switch of DP2-AOU to ON.
24
The [Play] tab is not selected.
Select the [Play] tab.
60
No image is recorded in the save
destination.
Acquire the still image.
26
Recording media such as USB
flash drive, etc. are not connected
properly.
Connect the recording media such as
USB flash drive, etc. to the connector
properly.
21
Nothing is shown on the
display.
The power of DP2-AOU is turned
OFF.
Press the main switch of DP2-AOU to
turn ON the power of DP2-AOU.
24
The power of the display is not
turned ON.
Turn ON the power.
–
The display cable is not connected
properly.
Connect the display cable to the
connector properly.
18
The display resolution is not set
properly.
Set the display resolution properly.
87
If problems occur, please review the following list and take remedial action as needed.
If you cannot solve the problem after checking the entire list, contact Olympus for assistance.
This section describes the possible problems of this product and their remedies.
