20
Press the main switch A of DP2-AOU to exit the system. Make sure
that the LED B is turned OFF completely (after approx. 10 seconds)
and disconnect the connector of the AC adapter.
If you disconnect the connector while LED
B
is ON, a
failure may be caused.
Disconnecting the AC adapter
NOTE
·
Do not use the product if the output plug of the AC adapter
is not inserted completely.
·
Never unplug or insert the output plug of the AC adapter
with wet hands.
·
If, by any chance, the AC adapter or the cord is very hot,
smells burnt or smokes, etc., unplug the power cord from
the outlet immediately and stop using the product. Also
contact Olympus immediately.
·
Never use the AC adapter which is not provided by
Olympus. Otherwise, DP2-AOU or the camera head may
be damaged or an unexpected accident such as fire may
occur. Olympus is not liable for any damage caused by
using an AC adapter which is not provided by Olympus.
·
Never stretch out, bend or twist the cord of the AC adapter
forcibly. Also never extend it by connecting it to another
cord.
·
If you find any scratch or disconnection on the cord of
the AC adapter or a bad connection is recognized on the
output plug, contact Olympus immediately.
·
If the product is not in use, unplug the power cord from the
outlet.
·
Do not connect the power cord to the wall outlet by putting
many plugs in one outlet or using a table tap extending to
many plugs. It may cause fire.
CAUTION
A
B
