Olympus BIX III, User Manual

Page: 70 / 102

10-015490-01EN, Rev. 2, June 2020
Chapter 5 62
To run a test
1. In Test dialog box of the Live Operator screen, select a test mode (see Figure 5-5
on page 62).
2. In the Sample Info dialog box, enter a Sample Name (30 alphanumeric characters
maximum).
Optionally enter information into
Info Field1 (10 characters maximum) and/or
Info Field2 (4 characters maximum).
The information that you enter in the Sample Info dialog box can be used to
uniquely identify the test in the Results screen.
For example, if you enter “BakerShaleA420” in
Sample Name , “20” in Info
Field1 , and “3X” in Info Field2 , the test name will appear in the results data as
“BakerShaleA420_20_3X”
3. In Test area, click Start .
Figure 5-5 Test and Sample Info areas
The test will run until complete. Results are displayed as the test progresses.
To stop a test

Click Stop (see Figure 5-5 on page 62).
To search for a result
1. Click the Results tab.
2. In the Date/Mode dialog box (see Figure 5-6 on page 63), use the calendar to find
results by date (optional).
Use the
Start date and/or End date choices to select a date range.