10-015490-01EN, Rev. 2, June 2020
Local Area Network Communication
53
2.
Use the arrow buttons to set
WIRED
to
OFF
:
— Use the right arrow button (
) to move from the
WIRED
field to the
ON
field.
— Use the up or down arrow button (
) to change the value to
OFF
(see
Figure 4-5 DHCP menu
3.
Press the
Check
button (
) to accept the changes and restart the BTX III.
The BTX III restarts with the new DHCP configuration and begins broadcasting a
WLAN.
4.4
Connecting your PC to the WLAN
Through the wireless LAN dongle, the BTX III broadcasts an unsecured WLAN that is
identified by the serial number of the analyzer. For example, if the serial number of
your BTX III is “670,” then it broadcasts on a network identified as “BTX-670.”
To connect your PC to the WLAN
1.
Turn on your WLAN-configured BTX III and wait until the menu is displayed (see
Figure 4-6 on page 54).
Summary of Contents for BIX III
