10-015490-01EN, Rev. 2, June 2020
Set Up and Operation
39
Figure 3-5 Sample sieves
3.4
Loading a Sample
Before you can load a crushed sample into the BTX III analyzer, you must remove the
sample carrier from the instrument, then load the sample into the sample cell.
There are four components of a sample cell (see Figure 3-6 on page 39):
•
An inner cell window comprised of a polymer window on a metal frame with a
notch at the top
•
A spacer, which is assembled between the inner and outer cell
•
An outer cell window that also has a polymer window on a metal frame, but
without a notch at the top
•
Screws to secure the cell assembly to a sample cell carrier
Figure 3-6 Sample cell window components
Inner window
Spacer
Outer window
Screws
Summary of Contents for BIX III
