10-015490-01EN, Rev. 2, June 2020
Local Area Network Communication
51
See “Broadcasting a WLAN through a Wireless LAN Dongle” on page 52 for
instructions on setting
WIRED
to
OFF
.
— If the LAN is set to
WIRED OFF
, the BTX III is configured to broadcast a
WLAN through a wireless LAN dongle.
See “Connecting to your LAN through the Ethernet Connector” on page 51
for instructions on setting
WIRED
to
ON
.
Figure 4-2 DHCP menu
4.2
Connecting to your LAN through the Ethernet Connector
When the LAN is set to
WIRED ON
, the BTX III is configured to connect to your LAN
through the Ethernet connector.
To connect to your LAN through the Ethernet connector
1.
Connect an Ethernet cable to the Ethernet connector on the rear of the BTX III.
2.
Use the arrow buttons to set
WIRED
to
ON
:
a)
Use the right arrow button (
) to move from the
WIRED
field to the
OFF
field.
b)
Use the up or down arrow button (
) to change the value to
ON
.
3.
To quickly set up the protocol, use the arrow buttons to set
DHCP
to
ON
(see
Figure 4-3 on page 52). Otherwise, change the DHCP parameters using the arrow
buttons.
Summary of Contents for BIX III
