8/10/2015
12
921458000_09_003
With the selection
«IDLE BACKLIGHT LEVEL» we select the brightness of the display when the
system is idle. By default the selection is set to 40%.
With the selection
«IDLE BACKLIGHT MODE» we can select when the illumination of the display is
active. There are 3 options:
ALWAYS OFF. The display is illuminated by pressing of any key. The brightness level drops
to the idle backlight level after 1 minute.
ONLY WHEN DISARMED. The display is always illuminated when the system is disarmed.
When the system is armed the display illumination turns ON after a key is pressed and the
brightness level drops after 1 minute.
ALWAYS ON (DEFAULT). The illumination of the display is always ON. This selection
reduces the autonomy of the system in case of power failure.
With the
«BUZZER SETTING» we select if the buzzer is sounded during all the events or only during
alarm events. The default setting is
«SOUNDS TO ALL EVENTS».
Finally the MASTER MENU has the option
«TIMERS». With this
selection we can program up to 10 automatic arming or disarming
procedures of all or part of the system. Selecting
«TIMERS» we
see the display below. If the
«CHANGE TIMER» is selected then
this means that the timer is active. If the
«DELETE TIMER» is
highlighted then this means that the timer is inactive. The inactive
timer always has a default time of 12:00
The selection
«CHANGE TIMER» is also used to create a
procedure.
By selecting
«CHANGE TIMER» using the up down arrow keys and pressing the (*) key we see:
Select the number of the timer that we want to alter or create and we see:
______TIMERS________
CHANGE TIMER
DELETE TIMER
CHANGE TIMER
SELECT FROM 01-10
- -
CHANGE TIME
^
12 :00
