8/10/2015
26
921458000_09_003
Initial settings of the automatic GSM telephone operator BS-454
To install the GSM card BS-454 in the panel BS-458, we must first deactivate it. Next install the card
according to the instruction. Next activate the panel.
We must inform the panel that the card was installed. This is done by going to the menu
«TECHNICIAN MENU»
« GSM INSTALLED » and select «YES»
Programming the telephone dialer GSM BS-454
Entry to the GSM menu is only allowed when a GSM dialer is registered in the system. (see menu
«TECHNICIAN MENU»
«GSM_INSTALLED»). Also if this selection is deactivated or we are in a
technician menu, the GSM does not accept or send commands. Also the remote access is permited
only by sms. In case someone tries to send a call to the GSM then the GSM will leave the telephone
to ring once and then close the line.
If the entry to the GSM menu is prohibited then the adjacent display is
show.
If the entry to the GSM menu is allowed then the adjacent screen is
shown.
«CALLING NUMBERS». The option permits us to store into memory a telephone number and give it
the properties that we require.
We can store up to 6 telephone numbers that can be mobile or
land line numbers, local or international. Using this menu we
select the number of the telephone that we want to alter. Select
from 1 to 6.
NO GSM CONNECTED
PRESS ‘#’ TO RETURN
____ GSM ____
CALLING NUMBERS
ENTER SIM CARD PIN
REMOTE ACCESS ENABLE
PHONE SERIAL NUMBER.
SELECT FROM 1 TO 6
-
