3H3
1-2-6
14. Place the slider on the projections on the fin-
isher rear side-plate and lock down with
three M4 x 8 S tight bind screws.
Insert the M4 x 8 S tight bind screws from
the round holes on the eject side of the fin-
isher.
15. Place the slider on the projections on the fin-
isher front side-plate and lock down with
three M4 x 8 S tight bind screws.
Insert the M4 x 8 S tight bind screws from
the round holes on the eject side of the fin-
isher.
Figure 1-2-14
16. Pull out the intermediate tray of the finisher.
17. Fit the large stop ring onto the unit lock rod.
18. Attach the unit lock hook to the lower guide
stay with the unit lock rod.
Figure 1-2-15
M4 x 8 S tight
bind screws
M4 x 8 S tight
bind screws
Slider
Slider
Projections
Projections
Unit lock rod
Large stop ring
Guide stay
Guide stay
Unit lock hook
Unit lock hook
Intermediate tray
Guide stay
Service Manual Y1043
71
-
8
