3H3
1-2-7
19. Fit the large stop ring onto the lower part of
the unit lock rod.
20. Hang one end of the large spring over the
hook on the unit lock hook and the other end
over the hook on the guide stay.
21. Insert the intermediate tray of the finisher
and return it to its original position.
Figure 1-2-16
22. Remove the tapes and the cushioning mate-
rials provided on the centerfold unit.
Figure 1-2-17
23. Pull the left and right sliders out until they
stop. Attach the centerfold unit on the pins of
the sliders.
Hold the centerfold unit by a indicated in the
illustration. Do not hold it by b at the center
of the unit.
Figure 1-2-18
Large stop ring
Unit lock hook
Hook
Hook
Unit lock rod
Guide stay
Large
spring
Tape
Tape
Tape
Tapes
Cushioning
material
a
Centerfold unit
a
b
Slider
Slider
Pin
Pin
Y1043
71-8
Service Manual