3H3
1-3-9
U248
Setting the paper stop timing
1. Select PUNCH POSITION ADJUST on the screen for selecting an item.
2. Change the value using the cursor up/down keys.
If the distance of the position of a punch hole is smaller than the specified value A, increase the preset
value. If the distance is larger than the value A, decrease the preset value.
Changing the value by 1 changes by 1.0 mm.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Displaying the punch-hole scrap count
1. Select PUNCH COUNT on the screen for selecting an item.
2. Change the value using the cursor up/down keys.
Press the reset key to clear the count.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting the booklet stapling position
1. Select SADDLE STAPLE ADJUST on the screen for selecting an item.
2. Select the size to be set.
3. Change the setting using the cursor up/down keys.
If the staple position is displaced toward the ejection side (copy sample 1), decrease the preset value.
If the staple position is displaced toward the feeding side (copy sample 2), increase the preset value.
Maintenance
item No.
Description
Description
Setting
range
Default
setting
Change in value
per step
Adjustment of the paper stop timing in punch mode
-10 to 10
0
0.24 mm
A
Preset value A: 5.5 2mm (inch)
9.5 2mm (metric)
+
-
+
-
Description
Setting range
Default setting
Punch-hole scrap count
(current number of punching times)
0 to 9999999
-
Display
Description
Setting
range
Default
setting
Change in value
per step
A4R/8.5 x 11 Adjustment of booklet stapling position for
A4R/8.5 x 11 size
-10 to 10 0
0.55 mm
B4R/8.5 x
14
Adjustment of booklet stapling position for
B4R/8.5 x 14 size
-10 to 10 0
0.55 mm
A3R/11 x 17
Adjustment of booklet stapling position for
A3R/11 x 17 size
-10 to 10 0
0.55 mm
Y1043
71-8
Service Manual
