3H3
2-1-11
Paper ejection operation to the main tray
Paper is ejected from the intermediate tray to the main tray (or the optional multi job tray) by the upper/lower paper con-
veying belt
motors (PCBM-U/L) rotating forward, which moves the intermediate tray upper/lower sliding plates upward so that the
paper is pushed upward. When paper is ejected to the main tray, the eject guide solenoid (EGSOL) turns on so that the
eject guide rises.
In the non-staple mode, the front/rear upper side registration guides move toward the machine front or rear to shift the
paper eject position sides of the machine. Each time paper is ejected to the main tray, the paper holder solenoid (PHSOL)
turns on so that the main eject holder lowers and presses the paper to the main tray so that it does not slip.
Figure 2-1-20
Main tray
Eject guide
Main eject holder
Upper paper
conveying belt
Lower paper
conveying belt
Intermediate tray
lower sliding plate
Intermediate tray
upper sliding plate
Y1043
71-8
Service Manual
