3H3
2-1-8
Stapling operation
There are four types of stapling. Paper is stapled with the selected stapling type and then moved to the shifted eject posi-
tion.
Figure 2-1-13
One-point stapling at the back/two-point stapling/one-point stapling at the front
1. The eject guide solenoid (EGSOL) turns on
so that the eject guide rises and prevents
the paper leading edge from contacting the
eject roller when paper is stapled.
Figure 2-1-14
2. The front/rear upper side registration guides
and the front/rear lower side registration
guides (for large size paper only) move to
the positions that are slightly outside the
actual paper width.
3. The lower paper conveying belt motor
(PCBM-L) rotates forward so that the inter-
mediate tray lower sliding plate moves
upward and moves paper to the stapling
travel height.
4. The front/rear lower side registration guides
return to their home positions.
5. The lower paper conveying belt motor
(PCBM-L) rotates backward so that the
intermediate tray lower sliding plate moves
downward and moves paper to the stapling
height.
* The operations described in step 1 to 5
above are not performed when A4/11" x 8 1/
2" paper is used.
Figure 2-1-15
Two-point stapling
One-point stapling
at the back
One-point stapling
at the front
Centerfold stapling
Eject guide
Eject roller
Front upper
side-registration guide
Front lower
side-registration guide
Rear upper
side-registration guide
Rear lower
side-registration guide
Intermediate tray lower
sliding plate
Stapling height
Stapling travel height
Service Manual Y1043
71
-
8