Olivetti d-COPIA4513MF plus Operation Manual Download Page 411

Page: 411 / 471

10-23

Troubleshooting > Troubleshooting

Message

Checkpoints

Corrective Actions

Reference

Page

RAM disk error.

―

An error has occurred on the RAM

disk. Job is canceled. Select [

End

The possible error codes and their

descriptions are as follows.
04: Insufficient space on the RAM

disk. If the optional RAM dis is

installed, increase the RAM disk

size by changing RAM Disk Setting

in System Menu.

NOTE

The range of RAM disk size can be

increased by selecting [

Printer

Priority

] in Optional Memory.

page 8-42

Removable memory
error.

Is writing to a removable memory

prohibited?

An error occurred in the removable

memory. The job stopped. Select

[

End

The possible error codes and their

descriptions are as follows.
01: Connect a removable memory

that can be written to.

―

An error occurred in the removable

memory. The job stopped. Select

[

End

The possible error codes and their

descriptions are as follows.
01: The amount of data that can be

saved at once has been exceeded.

Turn the power OFF/ON. If the error

still occurs, the removable memory

is not compatible with the machine.

Use the removable memory

formatted by this machine. If the

removable memory cannot be

formatted, it is damaged. Connect a

compatible removable memory.

―

Removable Memory is
full.

―

Job is canceled. Select [

End

Insufficient free space in the

removable memory. Delete

unnecessary files.

―

Remove originals in the
document processor.

Are there any originals left in the

document processor?

Remove originals from the

document processor.

―

Replace all originals and
press [Continue].

—

Remove originals from the

document processor, put them back

in their original order, and place

them again. Select [

Continue

] to

resume printing. Select [

Cancel

] to

cancel the job.

—

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands