Olivetti d-COPIA4513MF plus Operation Manual Download Page 236

Page: 236 / 471

5-51

Operation on the Machine > Printing Documents Stored in Removable USB Memory

Print the document.

Select the folder containing the file to be printed.

The machine will display documents in the top 3 folder levels, including the root folder.

Select the file to be printed > [

Print

]

Change the number of copies, duplex printing, etc. as desired.

For the features that can be selected, refer to the following:

Press the

[

Start

]

key.

Printing of the selected file begins.

NOTE

• 1,000 documents can be displayed.
• To return to a higher level folder, select [

Back

Removable Memory (Store File, Printing Documents) (page 6-8)

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands