Olivetti d-COPIA4513MF plus Operation Manual Download Page 187

Page: 187 / 471

5-2

Operation on the Machine > Loading Originals

Loading Originals

Placing Originals on the Platen

You may place books or magazines on the platen in addition to ordinary sheet originals.

When you place envelopes or cardstock on the platen

NOTE

For details on Original Orientation, refer to the following:

Original Orientation (page 6-12)

NOTE

For the procedure for feeding envelopes or cardstock, refer to the following:

When you load envelopes or cardstock in the multi purpose tray (page 3-14)

CAUTION

Do not leave the document processor open as there is a danger of personal injury.

IMPORTANT

• Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen

glass.

• When placing books or magazines on the machine, do so with the document processor in the open

position.

1 Put the scanning side facedown.
2 Align it flush against the original

size indicator plates with the back

left corner as the reference point.

1 Put the scanning side facedown.
2 Align it flush against the original

size indicator plates with the

back left corner as the reference

point.

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands