Olivetti d-COPIA4513MF plus Operation Manual Download Page 160

Page: 160 / 471

3-33

Preparation before Use > Registering Destinations in the Address Book

Adding a Destination on One Touch Key (One Touch

Key)

Assign a new destination (contact or group) to an one touch key. A maximum of 100 destinations can be registered.

Display the screen.

[

System Menu/Counter

] key > [

Address Book/One Touch

] > [

One Touch Key

]

Add One Touch Keys.

Select a One Touch Key number (001 to 100) for the destination >

[

]

Selecting the [

Quick No. Search

] key enables direct entry of a One Touch Key number.

Select a One Touch Key with no registered destination.

Select a destination (contact or group) to add to the One Touch Key number > [

Next

]

Selecting [

] shows the detailed information of the selected destination.

Enter the One Touch Key name displayed in the send base screen > [

Next

]

Select [

Save

The destination will be added to the One Touch Key.

NOTE

• Refer to the following for use of One Touch Key.

Specifying Destination (page 5-20)

• You can add One Touch keys and change their settings on

Embedded Web Server RX

Registering Destinations (page 2-63)

NOTE

Destinations can be sorted or searched by destination name or address number.

Specifying Destination (page 5-20)

NOTE

Up to 24 characters can be entered.

Refer to the following for details on entering characters.

Character Entry Method (page 11-11)

Address Book/One Touch - One Touch Key

10:10

System Menu/Counter.

None

AAA

None

BBB

None

CCC

1/9

End

001

004

007

010

011

008

005

002

012

009

006

003

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands