![background image](http://html1.mh-extra.com/html/oldham/olct-200/olct-200_user-manual_3711996050.webp)
OLCT 200 User Manual |
50
Figure 5-11: Diagnostics Menus
5.10 RS-485 / MODBUS SETUP
The
RS-485 MODBUS SETUP
menu allows setting the RTU address (if RS-485
equipped) for each OLCT 200 on the RS-485 network. Each OLCT 200 must have a
different RTU address when communicating on the same 2-wire cable. Baud rate,
Parity and Stop Bit are fixed at industry standard values of 9600, none ,1.
Note:
If
“
Marker TX LED
” is selected
RS-485 MODBUS SETUP
menu is not available,
because the serial port is no longer active.
Figure 5-12: Modbus RS-485 Setup Menu
* * * WA R N I N G * * *
A l a r m p r o c e s s i n g w i l l
b e h a l t e d d u r i n g
d i a g n o s t i c mo d e !
E D I T t o c o n t i n u e .
A n y o t h e r k e y t o e x i t .
D I A G N OS T I C S
O u t p u t S t i mu l a t i o n
R e l a y T e s t
OU T P U T S T I MU L A T OR
Ou t p u t 4 . 0 mA
E D I T t o c h a n g e .
N e x t t o e x i t .
EDIT
A C T I V A T E R E L A Y S
R e l a y 1 OF F
R e l a y 2 O F F
R e l a y 3 O F F
R S 4 8 5 MOD B U S S E T U P
R T U A d d r e s s 1
B a u d R a t e 9 6 0 0
P a r i t y N o n e
S t o p B i t 1
Summary of Contents for OLCT 200
