Oldham OLCT 200, User Manual, Page: 53 / 80

53
OLCT 200 User Manual | 53
EUNITS Chan 1 40423-40427 3 NA
EUNITS Chan 2 40428-40432 3 NA
10 ASCII characters (2 per register) assigned to the engineering units read as bytes.
Byte Variables:
PreAmp/Gain Ch1 40433 3 NA
PreAmp/Gain Ch2 40434 3 NA
2 bytes representing Pre Amp (HiByte) and PGA (LoByte) settings.
Firmware Version:
Version 40435-40436 3 NA
4 ASCII characters (2 per register) reflecting the firmware version.
Memory Reals:
Note:
Real value represents float value without the decimal point such as 123.4 is returned as
1234. Decimal devisor is returned as 1, 10, 100, or 1000 for decimal position of 1, 2, 3, or 4,
where 123.4 would return the value 10.
Chan 1 Cal Zero Real
41001 4 NA
Chan 1 Cal Zero Devisor 41002 4 NA
Chan 1 Cal Span Real 41003 4 NA
Chan 1 Cal Span Devisor 41004 4 NA
Chan 1 Zero Real 41005 4 NA
Chan 1 Zero Devisor 41006 4 NA
Chan 1 Span Real 41007 4 NA
Chan 1 Span Devisor 41008 4 NA
Chan 1 Fault Real 41009 4 NA
Chan 1 Fault Devisor 41010 4 NA
Chan 1 Alarm 1 Real 41011 4 NA
Chan 1 Alarm 1 Devisor 41012 4 NA
Chan 1 Alarm 2 Real 41013 4 NA
Chan 1 Alarm 2 Devisor 41014 4 NA
Chan 1 Alarm 3 Real 41015 4 NA
Chan 1 Alarm 3 Devisor 41016 4 NA
Chan 1 Manual Gain Real 41017 4 NA
Chan 1 Manual Gain Devisor 41018 4 NA
Chan 1 Manual Offset Real 41019 4 NA
Chan 1 Manual Offset Devisor 41020 4 NA
Chan 2 Cal Zero Real
41021 4 NA
Chan 2 Cal Zero Devisor 41022 4 NA
Chan 2 Cal Span Real 41023 4 NA
Chan 2 Cal Span Devisor 41024 4 NA
Chan 2 Zero Real 41025 4 NA
Chan 2 Zero Devisor 41026 4 NA
Chan 2 Span Real 41027 4 NA
Chan 2 Span Devisor 41028 4 NA
Chan 2 Fault Real 41029 4 NA
Chan 2 Fault Devisor 41030 4 NA
VARIABLE ALIAS READ FUNCTION CODE WRITE FUNCTION CODE