![background image](http://html1.mh-extra.com/html/oldham/olct-200/olct-200_user-manual_3711996048.webp)
OLCT 200 User Manual |
48
Figure 5-8: Sensor Information Menus
Install New Sensor
- The OLCT 200
Smart
sensor interface will automatically detect
new smart sensors and this menu is therefore not available with a smart sensor
connected.
Recall Cal History
recalls each successful calibration. These dates may be reviewed
by scrolling with the UP / DOWN keys.
Input Type
indicates what kind of input or sensor the OLCT 200 is configured to
accept and is typically pre-configured at the factory. There are five Input Type
possibilities consisting of bridge, EC negative, EC positive, 4-20mA and Smart. Smart
sensors upload sensor type and other data to the OLCT 200 and may be viewed on the
SMART SENSOR information screen.
New Sensor
displays the date when a new sensor was last installed.
Recent Cal
displays the most recent calibration date.
5.6 CLOCK/DELAY SETUP
Since the OLCT 200 is equipped with a Real Time Clock & Calendar
Time
and
Date
must be set to correctly match its location. They are set at the factory in a 24 hour
format but may require adjustment to match the location’s time & date after shipment.
Follow the procedure in
Configuration Using the Magnetic Wand
in section 3.3.
Warm Up
and
Cal Purge
time delays are also available to prevent unwanted alarm
trips. Figure 5-9 shows the menu for these items.
S E N S O R S E T T I N G S / I N F O
I n s t a l l S e n s o r
R e c a l l C a l H i s t o r y
I n p u t T y p e S MA R T
N e w S e n s o r 0 1/ 2 8 / 0 4
R e c e n t C a l 0 4 / 0 5 / 0 4
>
>
I N S T A L L N E W S E N S O R
E D I T t o i n s t a l l
N e w S e n s o r .
A n y o t h e r k e y
t o E x i t .
C A L I B R A T I O N D A T E S
R e c o r d 2 2 o f 2 2
C A L D a t e : 0 4 / 0 5 / 0 4
U P / D O WN t o s c r o l l
N E X T t o E X I T .
I N S T A L L N E W S E N S O R
H i s t o r i c a l C A L d a t a
Wi l l b e D e l e t e d .
E D I T t o A c c e p t
N E X T t o A b o r t
EDIT
EDIT
S e n s o r L i f e
>
S MA R T S E N S O R
T y p e : C a t - B e a d
S p a n : 10 0
Z e r o : 0
S N : x x x x x x
B o r n O n : 0 1/ 2 8 / 0 4
L a s t C a l : 0 4 / 0 5 / 0 4
A N Y k e y t o E x i t
Summary of Contents for OLCT 200
