Page: 85
Service Guide OL600e/610e/610ePS
Chapter 6 Troubleshooting
5 Cyclic error
Category
Frequency
Remedy
Image drum
3.71 (94.2 mm)
Replace or clean the image drum cartridge.
Developing
roller
1.66 (44.4 mm)
Replace the image drum cartridge.
Toner supply
roller
2.27 (57.8 mm)
Replace the image drum cartridge.
Charging roller
1.56 (39.6 mm)
Replace the image drum cartridge.
Cleaning roller
1.24 (31.4 mm)
Replace the image drum cartridge.
Transfer roller
2.01 (51.0 mm)
Replace the transfer roller.
Heat roller
2.47 (62.8 mm)
Replace the fusing unit assy.
Back-up roller
2.72 (69.08
mm)
Replace the back-up roller.
Notes:
1. After replacing the image drum cartridge, reset the drum counter.
2. After replacing the fusing unit assy, reset the fuser counter.
OL610e/PS: See 4.1.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for OL600e
