OKIDATA OL600e, Servise Manual

Page: 197 / 246

Page: 116
Service Guide OL600e/610e/610ePS
Chapter C Software Diagnostics and Adjustments
2. DOS Software Operating PanelOL600e & OL610e
- The diagnostic and adjustment controls on the DOS Operating Panel are on the Settings tab, available
to the end user, and the Service tab, available to service personnel only.
- The Operating Panel uses Windows-type controls and displays.
2.1 Settings Tab
- Selected controls on the Settings tab perform adjustment and resetting functions. This tab is avialble to
the end user.
- At the DOS prompt, enter OL600. When the Operator Panel appears, click on Settings or press the ALT
and S keys.
2.1.1. Reset Item
- Click on the item to be reset, then click on Reset.
(1) EEPROM - Resets all EEPROM areas, including Menu level-2, to the factory default values.
The following items are not reset:
Head drive time setting
Fine adjustment of printing start position
Standard tray paper feed amount setting
(2) Menu - Resets all level-1 menu settings to factory fefault values, including all available emulations and
options.
(3) Drum Count - Resets the drum life data. Perform this function whenever the image drum is replaced.
2.1.2. Print Position Adjust
- Adjusts the horizontal and vertical printing position of the first character of the first line on the page.
- Range of settings: -2.00mm to +2.00mm, in 0.25mm increments.
- Selected desired setting from list boxes.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)