OKIDATA OL600e, Servise Manual

Page: 190 / 246

Page: 112
Service Guide OL600e/610e/610ePS
Chapter C Software Diagnostics and Adjustments
Appendix C Software Diagnostics and Adjustments
1. Maintenance MenusOL610e/PS
- These menus are available on the OL610e/PS only see Section 2 for the equivalents for other models.
- The maintenance menus consist of the user maintenance menu available to the user, and the system
and engine maintenance menus, for service personnel only.
- Press the Menu key to update each category. The operation returns to the first category after updating
the last category.
- Press the Enter key to select or execute the function being displayed.
- To exit from any of these menus during category display, press the RECOVER or ON-LINE key and the
operation mode will start.
1.1 User Maintenance Menu
- To enter the user maintenance menu, turn the power on while holding down the Menu key.
- The user maintenance menu provides the following functions:
(1) Hex Dump
- The data received from the host is sent to the printer in hexadecimal notation.
- Printing starts automatically when the received data exceeds one page. If the received data is less than
one page, printing can be activated manually be pressing the Form Feed key after changing to the OFF
LINE mode. To print automatically even when the received data is less than one page, select the Auto
Eject function on the menu.
- To exit from this menu, turn the power off.
(2) Menu Reset
- All settings for Menu level-1 are reset to the factory default values.
- The menus for all available emulations, including options, are reset to the factory default values.
- The operation mode starts automatically when the menu reset is complete.
(3) Drum Counter Reset
- This function resets the drum life data when the user replaces the image drum unit.