OKIDATA OL600e Servise Manual Download Page 196

Page: 196 / 246

Page: 115

Service Guide OL600e/610e/610ePS

Chapter C Software Diagnostics and Adjustments

1.4 Factory User Setting Operation

- These procedures allow switching to ODA, OEL, and Non-Europe user settings .

(1) Factory ODA Setting:

Turn the power on while holding down the Menu key and the NEXT+ key.

(2) Factory OEL Setting:

Turn the power on while holding down the Menu key and the LAST- key.

(3) Factory Non-Europe Setting:

Turn the power on while holding down the Menu key and the FORM FEED key.

- After executing a factory user setting operation, set the EEPROM areas which are for other than the
engine block, to the factory default values.

Note: units are set for the intended destination at the time of shipment from the factory.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL600e















































































































































































































Search results

Summary of Contents for OL600e

Reviews:

Related manuals for OL600e

Brands by name

Popular brands

OKIDATA OL600e, Servise Manual

Search results

Summary of Contents for OL600e

Reviews:

Related manuals for OL600e

Brands by name

Popular brands