OKIDATA OL600e Servise Manual Download Page 110

Page: 110 / 246

- Head drive time setting
- Drum count total display
- Printing start position setting
- Engine reset
- Drum count display
- Factory adjustment

Note: "Printing start position setting" is for shipping. Do not change its default value.

Detailed descriptions of these functions are provided in Appendix C, Software Diagnostics & Adjustments.

4.1.4. DOS Operator PanelOL600e, OL610e

(1) Settings Tab

At the DOS Prompt, enter OL600, then click on Settings.

Functions:
- Reset EEPROM, Menu, Drum count
- Print position adjust

Detailed descriptions of these functions are provided in Appendix C, Software Diagnostics & Adjustments.

(2) Service Tab

Note: Only service personnel should use this mode; it should not be released to end-users.

Functions:

- Head Drive Time
- Revision information
- Climate
- Count information
- Market Place At the DOS Prompt, enter OL600 \S , then click on Service.

Detailed descriptions of these functions are provided in Appendix C, Software Diagnostics & Adjustments.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL600e















































































































































































































Search results

Summary of Contents for OL600e

Reviews:

Related manuals for OL600e

Brands by name

Popular brands

OKIDATA OL600e, Servise Manual

Search results

Summary of Contents for OL600e

Reviews:

Related manuals for OL600e

Brands by name

Popular brands