OKIDATA OL600e, Servise Manual

Page: 4 / 246

Table of Contents Page
....3.3.3 LED Head 37
....3.3.4 Eject Roller Assy 38
....3.3.5 Pulse Motor (Main) 39
....3.3.6 Pulse Motor (Registration) 40
....3.3.7 Lower Base Unit 41
....3.3.8 Motor Assy 42
....3.3.9 Hopping Roller Assy 43
....3.3.10 Stacker Cover Assy 44
....3.3.11 Registration Roller 45
....3.3.12 Transfer Roller 46
....3.3.13 Fusing Unit Assy 47
....3.3.14 Fusing Pressure Roller 48
....3.3.15 Sensor Plate (Inlet) 49
....3.3.16 Toner Sensor (Adhesion) 50
....3.3.17 Sensor Plate (Outlet) 51
....3.3.18 Manual Feed Guide Assy 52
....3.3.19 Sensor Plate (Paper Supply) 53
....3.3.20 Main Control PCB 54
....3.3.21 Power Supply Board and Contact Assy 55
....3.3.22 Transformer 56
....3.3.23 Cassette Guide L 57
....3.3.24 Cassette Guide R 58
4 Adjustments
4.1 Maintenance Menus and Functions 59
4.2 Adjustment When Replacing a Part 60
5 Periodical Maintenance
5.1 Periodical Replacement Parts 61
5.2 Cleaning 62
5.3 Lubrication 63
6 Troubleshooting
6. Troubleshooting - 6.1 Troubleshooting Tips 64
6.2 Points to Check before Correcting Image Problems 65
6.3 Tips for Correcting Image Problems 66
6.4 Preparation for Troubleshooting 67
6.5 Troubleshooting Flow 68
....6.5.1 Status Message/Trouble List 69
........Status Message/Trouble List - Continued 70
........Status Message/Trouble List - Continued 71
....6.5.2 Message Troubleshooting 72
........1 The printer does not work normally after the power is
turned on. 73
........[JAM error] 2-1 Paper input jam 74
........[JAM error] 2-2 Paper feed jam 75
........[JAM error] 2-3 Paper exit jam 76