4-16
What you see on the LCD
What it means/What to do
Please Replace Drum
Your drum cartridge has reached the limit of its design life. Your machine
cannot print until the drum cartridge is replaced.
Please replace the drum cartridge.
Please Replace Toner
Your toner cartridge is empty. Your machine cannot print until the toner
cartridge is replaced.
Replace the toner cartridge.
Please Supply Paper
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass tray.
Please Wait
Your fax machine’s printer is either warming up or busy.
Please wait until the fax is finished printing and then re-try your command
or operation.
Polling In Use
You tried to store the polling document in your fax machine, where one
already had been stored.
Wait for the fax to complete the regular polling operation or delete the
stored document, then try again.
Printer In Use
The command you’re trying to enter requires the use of the printer, which
is already in use.
Wait for the fax to finish printing, then try again.
Protect Doc. Stored
A received document was in your fax’s memory when you tried to turn off
the security reception passcode.
Print the received document from your fax’s memory, then retry the
desired operation.
Ration must be 100%
You cannot set the magnification ratio in Negative/Positive copy.
Set the magnification ratio to 100 % to use the Negative/Positive copy.
Scanner In Use
The command you’re trying to enter requires the use of the scanner,
which is already in use.
Wait for the fax to complete the scan, then re-try the desired command.
SecurityRx is Off
You tried to turn the security reception on using a Soft key which is
assigned to set the security reception to on or off, but security reception
setting has not set to on.
To turn on or off the security reception using a Soft key, first set the
security reception setting to on.
Sub-address In Use
You tried to enter a sub-address identical to one already being used in
another F-Code box.
Enter a different sub-address.
Toner Low
Your fax machine is almost out of toner.
Too Many Characters
You attempted to enter too many numbers or other characters in the
current operation.
Press CANCEL to delete the extra characters, then try again. You may
wish to review the operation’s appropriate instructions.
Too Many Locations
You tried to enter too many numbers for a broadcast. You can enter up to
200 autodialer numbers and up to 30 numbers entered through the
numeric keypad.
Press CANCEL to delete the extra numbers and then try again.
Too Many Steps
You tried to enter too many steps for a macro. You can enter up to 60
steps into a macro key.
Unable to Reduce
In the reduction copy using the ADF, if the calculated ratio is smaller than
minimum reduction ratio (50%), this message will appear and you cannot
make the reduction copy.
Use the FBS glass, however parts of the image might not be copied.
Use FBS Glass
You tried to enlargement copy using the ADF. Your machine cannot
enlargement copy from the ADF.
Please set your document on the FBS glass to make the enlargement
copy.
Summary of Contents for OKIOFFICE 1200
