Oki OKIFAX 5750, User Manual

Page: 82 / 154

English
68
Memory full save
With features like group dialling, “call origination” starts after an entire
document or set of documents is read into memory. If a document
memory overflow occurs the display will prompt whether the documents
already scanned in memory should be sent or deleted. The user then has
the choice of which option is appropriate. If the user makes no response
after a short time period then the documents will be automatically sent if
this function is defaulted to ON, or deleted if the default is set to OFF.
Available settings are ON and OFF. Speed access No. 17.
Instant dial
In the ON state, the document is scanned into memory and dialling starts
immediately. Although the function relies on memory availability,
connection to the remote location is confirmed and the document is trans-
mitted faster when memory is available. If it is set to OFF, the machine
first confirms contact with the remote location and then transmits the
document reading from the document tray (without scanning into
memory). Speed access No. 18.
Restrict access
This function controls whether or not machine operation is restricted or
not. In the ON state, if RESTRICTION ID has been programmed, users
must enter a password before being allowed access to the machine’s func-
tions. Set to OFF, no password is required even if RESTRICTION ID has
been programmed. Speed access No. 19.
ECM function
The error correction mode (ECM) function is provided to improve
communications in areas where telephone line conditions are very poor.
Available settings are ON and OFF. Speed access No. 20.
Sender ID (ON/OFF)
This function determines whether the Sender ID is to be printed on the
transmitted fax at the remote site. Available settings are ON and OFF: set
to ON, the ID is included on the fax. Speed access No. 23.
5750GB.book Page 68 Tuesday, June 6, 2000 8:08 PM