Oki OKIFAX 5750, User Manual

Page: 23 / 154

English
Chapter 1 - Introduction 9
Use LIGHT for originals that are too light, NORMAL for originals
with good contrast, and DARK for originals that are too dark.
8. CLEAR key: Use this key to cancel ID, telephone number and pro-
gramming entries.
9. MENU/EXIT: Use this key when the machine is in standby state to
activate the Menu mode. When Menu mode is activated, press this
key to exit the mode and return to the standby state.
10. */TONE key: If the machine is set for pulse dialling, pressing this
key will switch from pulse to tone dialling during the current call.
This key can also be used during programming to create numbers
with mixed pulse-tone operation.
(Due to local regulations, this key
may not be available in some countries.)
11. 0/UNIQUE key: Use this key as “0” when dialling telephone num-
bers. When programming the Sender ID, Location ID, etc., use this
key to enter unique characters (symbols and various European
alphabetic characters).
12. Numeric keypad: These 12 keys work like the keypad on a stand-
ard telephone when dialling a telephone number. They are also used
when programming the machine, and to input speed dial numbers
after pressing the SPEED DIAL key. The “#” key is used for select-
ing pre-programmed groups of telephone numbers for group dial-
ling (broadcasting).
13. REDIAL key: Press this key to automatically redial the last tele-
phone number dialled on the machine.
14. HOOK key: Use this key to open the telephone line for manual
dialling with the numeric keypad or external telephone handset.
After pressing this key, it will be possible to hear the dial tone and
dialling code through the machine’s speaker.
15. SPEED DIAL/SEARCH key: After loading a document, press this
key and then enter the programmed Speed Dial (One-Touch or 2- or
3-digit) number for the location. The speed dialling function will
automatically dial the telephone number and transmit the fax. After
pressing the SEARCH key, it is possible to search corresponding
location IDs when alphanumeric characters are entered. The
SPEED DIAL key can also be used with the # key and numeric key-
pad for group dialling.
16. HYPHEN key: Use this key as the “–” character when program-
ming ID and PBX, public line, international telephone or Earthing/
5750GB.book Page 9 Tuesday, June 6, 2000 8:08 PM