Oki OKIFAX 5750, User Manual

Page: 29 / 154

English
Chapter 2 - Functions 15
Accessing functions
There are two methods for accessing functions: step access and direct
(speed) access.
Step access
To access functions in a stepwise manner, the procedure is similar to navi-
gating the menu levels. Begin by pressing MENU/EXIT, and then use the
programming keys to locate, enter and set the desired function.
For example, to set the number of times the machine redials a number
when the machine is in standby mode with no document loaded, more
than 10 keys must be pressed for Redial Tries to appear on the display.
1. Press MENU/EXIT.
2. Press
"
three times to select Setup.
3. Press ENTER or
$
to enter Setup menu.
4. Press
"
three times to select Dial Options.
5. Press ENTER or
$
to enter Dial Options.
6. Press ENTER or
$
to enter Redial Tries.
Speed access
If the function is assigned a speed access number, typing this number in
at the menu display prompt at level 1 will bring up the setting or registra-
tion display in level 4 for direct access.
Note 1: Speed access numbers are only assigned to SETUP menu func-
tions (level 4.)
Note 2: Speed access can only be initiated from the level 1.
Note 3: Numbers must be entered in 2-digit form (i.e., 00-99)
Note 4: Speed access numbers are set at the factory and cannot be
changed. Some numbers are not available depending on the
country in which a machine was purchased and whether or not
the machine is equipped with the appropriate option(s).
For example, to set the number of times the machine redials a number
when the machine is in standby mode with no document loaded, only 3
keys must be pressed for Redial Tries to appear on the display.
5750GB.book Page 15 Tuesday, June 6, 2000 8:08 PM