Oki OKIFAX 5750, User Manual

Page: 60 / 154

English
46
2. If a signal from a remote facsimile machine is heard or the party
wishes to send a fax after finishing a conversation, press the START
key.
3. When the message “Receiving” appears on the display, hang up the
handset.
4. The machine will emit a tone following line disconnection, inform-
ing the transmission status (i.e., successful or unsuccessful tones).
Receiving to memory
Memory Reception Mode (MEM): When set to MEM, the machine will
automatically receive messages into memory and store them there even
when there is paper loaded for printing. Data stored in memory can be
printed out using the PRINT FROM MEMORY function.
Printing from memory
1. Press MENU/EXIT to enter the menu.
2. Press
"
to select PRINT FROM MEMORY, press ENTER or
$
.
3. Press
"
to select PRINT MEMORY MSG., press ENTER or
$
.
4. If a password is not required, data in memory will be printed out. If
a password is required, enter 4-digit password, press ENTER.
Note: Password is only required when previously programmed and
machine answering mode is set to MEM (see Memory Pass-
word).
5. Data in memory will be printed out.
No paper reception
If the machine runs out of paper when receiving a fax, a message will be
displayed and the data not yet printed stored in memory automatically for
printing out later. The machine will print the data stored in memory auto-
matically after paper is added to the paper tray.
No toner reception
If the machine is running low on toner and NO TONER MEMORY
RECEIVE is set to ON, incoming faxes are stored in memory automati-
cally for printing later (rather than risk printing illegible faxes). If the
5750GB.book Page 46 Tuesday, June 6, 2000 8:08 PM