Oki OKIFAX 5750, User Manual

Page: 48 / 154

English
34
ISDN Sub No. (optional)
: The ISDN Sub No. requires the input of 19
numeric digits for the sub address of the machine when in ISDN mode.
Speed access No. 08
Setting ISDN parameters
To set dial, incoming call and other basic parameters, as well as MCF and
ISDN G4 Options:
1. Press MENU/EXIT to enter the menu.
2. Enter the speed access number of the parameter to be changed and
wait for the appropriate display prompt.
3. When the display for the desired parameter is shown, press
!
or
"
to select the setting (or input data where required), press ENTER.
4. Press MENU/EXIT to return to standby mode.
5. Repeat the above steps until finished setting parameters.
Connecting to a PBX
Private Branch Exchanges (PBXs) are private telephone systems used to
route calls internally, for example, in a company. When dialling a tele-
phone number, if a prefix (access) number is required to open an outside
line, the line is connected to a PBX. If this machine is going to be
connected to a PBX, please make the following changes to enable the
machine to recognise the prefix digits in the telephone numbers used to
obtain access to the outside line. After dialling the prefix digits, the
machine will wait until the outside line is available (secondary dial tone
detected) before dialling the rest of the number.
Note: Service assistance may be required to make changes in some
countries. Also, some PBX systems may require additional
adjustments to the machine. If there is any problem with fax
communications after changing parameters, please contact your
authorised dealer for assistance.
Setting PBX parameters
1. Press MENU/EXIT to enter the menu.
2. Enter the speed access number 50 (PBX LINE) and wait the display
prompt.
3. Press
!
or
"
keys to select ON or OFF setting, press ENTER.
5750GB.book Page 34 Tuesday, June 6, 2000 8:08 PM