Oki OKIFAX 5750, User Manual

Page: 58 / 154

English
44
3. Repeatedly press the letter key to scroll through the list of location
IDs beginning with that letter.
4. When the correct location is found, press the START key to begin
faxing.
Real-time dialling
The machine normally dials the entire telephone number of a location at
one time. However, telephone numbers can also be dialled in real time
(one digit at a time). To dial from the machine itself, press the HOOK key,
and dial using the numeric keypad on the machine’s control panel.
Another way to dial in real time is when an external telephone is
connected. Pick up the handset and dial using the keypad on the telephone.
Redialling
If a line is busy or there is no answer, the machine will wait and then auto-
matically redial the number. Additionally, if the machine is transmitting
from memory and a communication error occurs, it will automatically
redial the number and send the fax again. Manual redialling of the last
telephone number called is also possible at any time by pressing the
REDIAL key on the control panel.
Faxing to multiple locations
1. Load the document(s).
2. Select a location as follows:
To Dial Using Do This
One-touch key Press the one-touch key
2 or 3-digit dial
Press SPEED DIAL key, then enter Speed Dial number using the numeric
keypad.
Search
Press the SPEED DIAL key, then enter the first character using a one-touch
key.
Numeric keypad
Dial as if using a telephone. If a mistake is made, press the
#
key to move
the cursor back and re-enter the correct number (the DEL key deletes the
character at the current cursor position, or the CLEAR key deletes all
characters from the current cursor position to the end).Up to 10 locations
can be entered in this way.
If the ISDN G4 board is installed, you will be prompted to select either G3
or G4 transmission. Use the
!
and
"
keys to make your selection and press
ENTER.
5750GB.book Page 44 Tuesday, June 6, 2000 8:08 PM