Other Issues
- 150 -
Network Connection Problems
Common to Windows and Mac OS X
For Windows
Cause
Remedy
Reference
The Job Type of "Secure Print", "Store to
HDD" and "Encrypted Secure Print" are
unselectable on the MB491.
For Windows PCL Driver
1.Click [
Start
] > [
Devices and Printers
].
2.Right-click the [
OKI MB491(PCL)
] icon and select
[
Printer properties
]. (If you have installed multiple
printer drivers, select [
Printer properties
] > [
OKI
MB491(PCL)
]).
3.Select the [
Device Options
] tab.
4.For the network connection, select [
Get Printer
Settings
].
For the USB connection, add a check to [
SD Memory Card
].
5.Click [
OK
].
For Windows PS Driver
1.Click [
Start
] > [
Devices and Printers
].
2.Right-click the [
OKI MB491(PS)
] icon and then select
[
Printer properties
]. (If you have installed multiple
printer drivers, select [
Printer properties
] > [
OKI
MB491(PS)
].)
3.Select the [
Device Settings
] tab.
4.For the network connection, select [
Get installed
options automatically
] under [
Installable Options
],
and then click [
Setup
].
For the USB connection, select [
Installed
] for [
SD
Memory Card
] under [
Installable Options
].
5.Click [
OK
].
Advanced
Cause
Remedy
Reference
Using a crossover cable.
Use a straight cable.
-
The machine is turned on before a cable
was connected.
Connect cables before turning on the machine.
The hub and the machine are incompatible
or have some problem.
Press the <
SETTING
> key and select [
Admin Setup
] >
[
Network Menu
] > [
Network Setup
] > [
HUB Link
Setting
], and then select [
10BASE-T HALF
].
-
The network connection method setting is
wrong.
This product cannot connect to a wired LAN and wireless
LAN at the same time. To connect to a wired network,
set the network connection method to wired. To connect
to a wireless network, set the network connection
method to wireless.
-
Not connected to a wireless access point.
Check that the wireless access point power is switched
on.
Check the wireless access point settings, and then try
the manual settings or automatic settings.
Restart the wireless LAN function.
Press the <
SETTING
> key and select [
Admin Setup
] >
[
Network Menu
] > [
Network Setup
] > [
Wireless
Setting
], and then select [
Reconnect Wireless
].
-
Cause
Remedy
Reference
IP address is incorrect.
Check that the same IP address is set for the machine
and the machine's port setting on the computer.
If using OKI LPR Utility, check the IP address setting in
OKI LPR Utility.
