Connecting to a Computer
- 47 -
Setup
1
Network Connection
Perform the following procedure to connect your
machine to a computer via network.
Connecting using wired LAN
Connecting an Ethernet Cable
Be sure to connect your machine to a network
with an Ethernet cable before driver installation.
1
Prepare an Ethernet cable and a hub.
Prepare an Ethernet cable (category 5, twisted
pair, straight) and a hub separately.
2
Hold down the power switch for about a
second to turn on the power and
computer.
Reference
"Turning Off Your Machine" P. 20
3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4
Plug the other end of the Ethernet cable
into the hub.
Connecting using wireless LAN
(MB451w, MB471w only)
Configuring automatically using
push-button method
Use the WPS (push button) function to set the
wireless LAN.
1
Log in as the administrator.
2
Press the to select [
Network Menu
],
and then press the
.
3
Press the to select [
Network Setup
],
and then press the
.
4
Press the to select [
Wireless
Setting
], and then press the
.
5
Press the to select [
Set
automatically (WPS)
], and then press
the
.
6
Press the to select [
WPS-PBC
], and
then press .
7
Press the to select [
Yes
], and then
press .
2
OK
OK
