Authentication by User Name and Password
- 128 -
Authentication by User Name and Password
This section explains how to enable the access control using the authentication by the user name and
password and how to operate when the access control is enabled.
Registering User Name and
Password
Before enabling user authentication and access
control, be sure to register a user name and a
password for each user. You must be the
administrator to register user names and
passwords.
To register a user name and password, launch
PIN Manager from Configuration Tool.
Reference
For details on how to register a user name and password
from Configuration Tool, refer to the User's Manual
Advanced.
Enabling Access Control
You must be the administrator to control access
to the machine.
1
Press the <
SETTING
> key on the
operator panel.
2
Press the to select [
Admin Setup
]
and then press .
3
Enter the administrator password.
The default password is "aaaaaa".
4
Select [
Enter
] and then press .
5
Press the to select [
Management
]
and then press .
6
Press the to select [
System Setup
]
and then press .
7
Check that [
Access Control
] is selected
and then press .
8
Press the to select [
User/Password
]
and then press .
9
Press the to select [
User
Authentication Method
] and then
press .
10
Check that [
Local
] is selected and then
press .
Reference
When you select [
LDAP
] or [
Secure Protocol
], the
server settings are necessary. For details, refer to the
User's Manual Advanced.
11
Press the until the message of "Access
Control has been enabled." is displayed.
Operation When User Name and
Password Authentication is Enabled
Logging Into the Machine
1
Check that [
User Name
] is selected and
then press the .
2
Enter your name.
3
Select [
Enter
] and then press .
4
Check that [
Password
] is selected and
then press the .
5
Enter your password.
6
Select [
Enter
] and then press .
7
Press on the [
Login
] screen, press .
If authentication succeeds, the top screen
appears.
Reference
For details on how to enter text, refer to
Using the Operator Panel" on P. 26
Logging Out of the Machine
When you have finished operations, be sure to
log out of the machine.
1
Press the until the top screen appears.
2
Press the <
RESET/LOG
OUT
> key on
the operator panel.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
